Review for Camco RhinoFLEX 20ft RV Sewer Hose Kit – sure to make cleaning a breeze.
Place to buy: Amazon.com
Length: 20 ft.
Overall rating: 4.3 out of 5
When it’s time to do the dreadful job of cleaning your RV black tank, it’s the sewer tank for those of you that don’t know what that is. You want to make sure you have a good enough sewer hose to handle the job.
This 20 ft. kit has the toughest hose you can buy. This sewer hose kit can be used as a 10 ft. kit or a 20 ft. kit with a translucent elbow and 4-in-1 adapter that is included with the kit. This kit includes two 10 ft. RhinoFLEX sewer hoses with pre-attached bayonet and lug fittings, translucent elbow with 4-in-1 adapter and 4 storage caps. This Sewer Hose Kit comes with RhinoFLEX Hose and Swivel Fittings that have a super tough bayonet fitting with four prongs for a more secure fit. At the dump-station end there is an easily detachable 4-in-1 translucent elbow adapter for fitting to 3 in. slip or 3 in., 3-1/2 in. and 4 in. threaded pipes. The fittings swivel and feature reusable locking rings so that the fittings can be used with additional RhinoFLEX hoses if you happen to need more length. You can remove the 4-in-1 adapter to allow you to store the hoses in a 4 in. square storage bumper.
This is what comes in the box:
- (2) Detachable bayonet style fittings
- (2) Detachable lug fittings
- (1) Detachable translucent elbow
- (1) 4-in-1 adapter
- (2) Polyolefin hoses reinforced with steel wire
- (4) End caps
- (4) Locking Rings
Strong & Flexible
The RhinoFLEX hose can bend and hold its shape because it is reinforced with wire. Only extend as much hose as you think you need and don’t worry about excess.
The translucent elbow lets you see when your tank is empty and the 4-in-1 adapter safely connects to any standard dump station.
Bayonet Style Swivel Fittings
The fittings swivel for easy connection, the 4-prong bayonets securely attach to any standard lug fitting.
The locking rings and the fittings twist together to securely attach the fitting to the hose without using glue. To attach the locking rings and fittings, twist the black locking ring in the unlock direction down the hose 5 or 6 inches. Then, screw the fitting on in the ‘tighten’ direction until it stops. Once you have the fitting set, twist the locking ring back up the hose in the lock direction until the teeth at the top of the ring are firmly engaged with the fitting. There are arrows on each part indicating which direction to turn it. You want to always make sure to test the fittings and locking rings to make sure you have a tight fit before emptying your tanks.
This sewer hose kit is one kit you would want as part of your RV gear. It is very inexpensive and is in very good quality. If you have any questions or comments please leave them in the comments section below.